Black carbon cookstove emissions: A field assessment of 19 stove/fuel combinations

Black carbon cookstove emissions: A field assessment of 19 stove/fuel combinations

Authors:

Charity Garland, Samantha Delapena, Rajendra Prasad, Christian L'Orange, Donee Alexander, Michael Johnson...
Resource type:
Scientific Publications
Publishing year:
2017

Black carbon (BC) emissions from household cookstoves consuming solid fuel produce approximately 25 percent of total anthropogenic BC emissions. The short atmospheric lifetime of BC means that reducing BC emissions would result in a faster climate response than mitigating CO2 and other long-lived greenhouse gases. This study presents the results of optical BC measurements of two new cookstove emissions field assessments and 17 archived cookstove datasets. BC was determined from attenuation of 880 nm light, which is strongly absorbed by BC, and linearly related between 1 and 125 attenuation units. A relationship was experimentally determined correlating BC mass deposition on quartz filters determined via thermal optical analysis (TOA) and on PTFE and quartz filters using transmissometry, yielding an attenuation cross-section (sATN) for both filter media types. sATN relates TOA measurements to optical measurements on PTFE and quartz (sATN(PTFE) ¼ 13.7 cm2 mg, R2 ¼ 0.87, sATN(Quartz) ¼ 15.6 cm2 mg, R2 ¼ 0.87). These filter-specific sATN, optical measurements of archived filters were used to determine BC emission factors and the fraction of particulate matter (PM) in the form of black carbon (BC/PM). The 19 stoves measured fell into five stove classes; simple wood, rocket, advanced biomass, simple charcoal, and advanced charcoal. Advanced biomass stoves include forced- and natural-draft gasifiers which use wood or biomass pellets as fuel. Of these classes, the simple wood and rocket stoves demonstrated the highest median BC emission factors, ranging from 0.051 to 0.14 g MJ1 . The lowest BC emission factors were seen in charcoal stoves, which corresponds to the generally low PM emission factors observed during charcoal combustion, ranging from 0.0084 to 0.014 g MJ1 . The advanced biomass stoves generally showed an improvement in BC emissions factors compared to simple wood and rocket stoves, ranging from 0.0031 to 0.071 g MJ1 . BC/PM ratios were highest for the advanced and rocket stoves. Potential relative climate impacts were estimated by converting aerosol emissions to CO2-equivalent, and suggest that some advanced stove/fuel combinations could provide substantial climate benefits.

Tags

Themes / initiatives:

Keywords

Initiatives

Back to Top